0
0
이전
다음
위로
  공지 사항
  FAQ
  입금,배송,A/S 문의
  제품문의
  기술문의
  제조사별 A/S 센타
  드라이버 자료실
  광통신 자료실
  메뉴얼 자료실
  무선 자료실
  네트워크 자료실
  시리얼통신 자료실
  여행, 호텔용품 자료실
  프로그램 자료실
  각종 규격,인증자료실
  최신 정보| 기사들
  모바일 관련제품 자료실
  EXA OPTICS 카다록, 데이타시트
[EXA] 10GBase-T Copper SFP+ 30m 광모듈- RJ45
400,000원
EXA-61P POF 프라스틱 광케이블 측정키트 -윈도,usb,시리얼 지원
4,840,000원
SH4002 플라스틱 광패치코드( POF)-코어 1.0mm
5,000원
MS-5AMP1000B-OUTDOOR 5GHz 아웃도어용 손실방지기 1W
950,000원
EXA SFP포트용 Dust Cover
3,000원
   현재위치 : HOME > 커뮤니티 > 시리얼통신 자료실 
시리얼통신 자료실
  일반적인 RS232 케이블 연결방법
  2017-08-10 16:52:23   416
  EXA 통신몰

일반 RS-232 케이블 연결방법

This document includes information how to make common wires for RS-232 connections. I have shown pinouts for standard 25 pin connection and de-facto 9 pin connector used in PCs.

Normal DTE-DCE connection

Thise wirings can be used with normal Data Terminal Equipment (DTE) to Data Communications Equipment (DCE) connections. The wiring are standard way to do asyncronous DTE to DCE connection and they support hardware handshaking. Good wires for PC to modem connections. 9 pin to 25 pin wiring can also be used for making 9 pin to 25 pin connector adapters.

 

DTE (25 pin)                 DCE (25 pin)

TD   2 ------------------------> 2

RD   3 <------------------------ 3

RTS 4 ------------------------> 4

CTS 5 <------------------------ 5

DSR 6 ------------------------> 6

DCD 8 ------------------------> 8

DTR 20 ------------------------> 20

SG   7 ------------------------- 7

RI    22 <------------------------ 22

 

DTE (9 pin)                  DCE (25 pin)

TD   3 ------------------------> 2 

RD   2 <------------------------ 3 

RTS 7 ------------------------> 4 

CTS 8 <------------------------ 5 

DSR 6 ------------------------> 6 

DCD 1 ------------------------> 8

DTR 4 ------------------------> 20

SG   5 ------------------------- 7

RI    9 <------------------------ 22

Two-wire DTE-DCE wiring

This wiring can be used between DTE and DCE where hardware handshaking is not needed.

 

DTE (25 pin)              DCE (25 pin)

TD   2  ------------------------> 2

RD   3 <------------------------ 3

RTS 4  ----,                      ,----- 4

CTS 5 <---'                      '----> 5

DSR 6 <---,                      ,----> 6

DCD 8 <---|                     |----> 8

DTR 20 ----'                     '----- 20

SG   7 ------------------------- 7

 

DTE (9 pin)               DCE (25 pin)

TD   3  ------------------------> 2

RD   2 <------------------------ 3

RTS 7  ----,                     ,----- 4

CTS 8 <---'                     '----> 5

DSR 6 <---,                     ,----> 6

DCD 1 <---|                    |----> 8

DTR 4  ----'                     '----- 20

SG   5 ------------------------- 7

Null modem cable

This cable can be used when you must connect two DTE equipments like computers to each other directly without using any data communication quipment in between computers. This wiring supports hardware handshaking.

 

DTE (25 pin)                DTE (25 pin)

TD   2  ---------\ /------------- 2

RD   3 <--------/ \------------> 3

RTS 4  ---------\ /------------- 4

CTS 5 <--------/ \------------> 5

DSR 6 <---,                       ,----> 6

DCD 8 <---+----\ /-------+----> 8

DTR 20 ---------/ \------------- 20

SG   7  ------------------------- 7

 

DTE (25 pin)                DTE (9 pin)

TD   2  ---------\ /------------- 3

RD   3 <--------/ \------------> 2

RTS 4  ---------\ /------------- 7

CTS 5 <--------/ \------------> 8

DSR 6 <---,                       ,----> 6

DCD 8 <---+----\ /-------+----> 1

DTR 20 ---------/ \------------- 4

SG   7 ------------------------- 5

 

DTE (9 pin)                 DTE (9 pin)

RD   2 ---------\ /------------- 2

TD   3 <--------/ \------------> 3

RTS 7 ---------\ /------------- 7

CTS 8 <--------/ \------------> 8

DSR 6 <---,                       ,----> 6

DCD 1 <---+----\ /-------+----> 1

DTR 4 ---------/ \------------- 4

SG   5 ------------------------- 5

Two-wire DTE-DTE connection

This cable can be used when you must connect two DTE equipments like computers to each other directly without using any data communication quipment between computers. This wiring needs only two signal wires and ground between computers but does not support hardware handshaking.

DTE (25 pin)                 DTE (25 pin)

TD   2 ---------\ /------------- 2

RD   3 <--------/ \------------> 3

RTS 4  ----,                       ,----- 4

CTS 5 <---'                       '----> 5

DSR 6  <---,                      ,----> 6

DCD 8 <---|                     |----> 8

DTR 20 ----'                      '----- 20

SG   7 ------------------------- 7

 

DTE (25 pin)                 DTE (9 pin)

TD   2  ---------\ /------------- 3

RD   3 <--------/ \------------> 2

RTS 4  ----,                       ,----- 7

CTS 5 <---'                       '----> 8

DSR 6  <---,                      ,----> 6

DCD 8 <---|                     |----> 1

DTR 20 ----'                      '----- 4

SG   7 ------------------------- 5

 

DTE (9 pin)                   DTE (9 pin)

TD   3  ---------\ /------------- 3

RD   2 <--------/ \------------> 2

RTS 7  ----,                       ,----- 7

CTS 8 <---'                       '----> 8

DSR 6 <---,                       ,----> 6

DCD 1 <---|                     |----> 1

DTR 4  ----'                      '----- 4

SG   5 ------------------------- 5

PC to printer cable

This is a wiring for cable for connecting printer to computer. Both printer and computer are DTE quipment and printer uses DTR busy signalling. This is good cable for PC to printer connection when printer uses DTR bysy or XON/XOFF signalling.

Computer                                 Printer

DTE (25 pin)                     DTE (25 pin)

TD   2  ------------------------> 3 RD

RD   3 <------------------------  2 TD

CTS 5 <--+--------------------- 20 DTR

DSR 6 <--'

DCD 8  <--,

DTR 20 ---'

SG  7  -------------------------  7 SG

 

Computer                                 Printer

DTE (9 pin)                      DTE (25 pin)

TD   3  ------------------------> 3 RD

RD   2 <------------------------  2 TD

CTS 8 <--+--------------------- 20 DTR

DSR 6 <--'

DCD 1 <--,

DTR 4  ---'

SG   5 -------------------------  7 SG

Loopback tester

This is a simple and useful tool for testing RS-232 ports in DTE equipment are working working or not. This plug is connected so that every sent character is echoed back.

DTE (25 pin)

TD   2  --------,

RD   3 <-------'

RTS 4  --------,

CTS 5 <-------'

DSR 6  <-------,

DCD 8 <-------|

DTR 20 --------'

 

DTE (9 pin)

TD   3  --------,

RD   2 <-------'

RTS 7  --------,

CTS 8 <-------'

DSR 6 <-------,

DCD 1 <-------|

DTR 4  --------'

 

출처 : http://www.epanorama.net/documents/pc/rs232cables.html


 MOXA 산업용 스위치허브 EDS-316-T 모델소개 (-40도~75도)